1. Rod (Chisel)
It is the final part that delivers the impact energy from the breaker to the blowing target. There are special types of the rod for various applide operations and tasks.
2. Front Head
It is the passage part where the kinetic enerey of the Piston is converted into the impact energy to the Rod.
3. CYlinder
It is intricately connectde with both the hydraulic oil passage and the grooves and ?xes the stroke distance of the Piston. Cylinder is considered as the core of the hydraulic breaker in which the Control Valve System moves in accordance with straight reciprocation of the Piston.
4. Piston
It is operated by the straight reciprocation in the Cylinder, and by means of the hydraulic pressure energy. It Comnines the accumulated hydraulic pressure energy and the gas energy and carries the kinetic energy which is converted into the impact energy when it hits the Rod.
5. Accumulator
The Accumulator compensates the pressure in the hydraulic circuit during the operation to prevent a pulsation effect which might damage the carrier(TP150-TP550).
6. Control Valve
It manages closing & opening of the hydraulic oil circuit in the Cylinder, adn controls the ascending & desending reciprocation movement of the Piston with a complex mechanism.
7. Back Head
It has the gas chamber filled with the N2 gas to accumulate the gas pressure when the Piston goes upward.
8. Through Bolt
It is one of the most impotant parts of the breaker supports the smooth straight reciprocation mevement of the Piston.
